Polyadds compatilizer Newyuan E068
Item specifics
- Appearance:
- Colorless to translucent particles
Review
Description
Physical Property:
E068:
Base material:Ethylene vinyl acetate copolymer EVA
Density:0.955±0.150
Melt index (g/ 10min): 1.5±0.8
Relative grafting rate %: High
Addition amount:5-10%
E068-Si:
Base material:Ethylene vinyl acetate copolymer EVA
Density:0.955±0.150
Melt index (g/ 10min):≥2
Relative grafting rate %:High
Addition amount:5-10%
Application:
Modification, cable industry-specific, hot melt adhesive industry-specific,E-type, EPE, perovskite film
FAQs:
description
The E068 system is a product that uses a special process to modify and graft maleic anhydride on ethylene vinyl acetate copolymer. After EVA is grafted with MAH, there is a stronger dual-monomer grafting (MAH, VA) combination between inorganic fillers such as Mg (OH) 2 and AL (OH) 3, so that it can be used in large quantities and widely for filling cable materials.
The E068-Si system is a product that uses a special process to modify and graft ethylene vinyl acetate
copolymer with silane. Both greatly improve the affinity and adhesion between resins and between resins and inorganic substances (including glass), thereby greatly improving the peeling and tearing strength. At the
same time, it reduces the precipitation of small molecules. It has broad prospects for use and application in the modification, cable and photovoltaic industries.
features
Extremely low addition amount, strongly improves the bonding strength between resin and resin layer, resin and inorganic layer.
Reduces the delamination problem caused by the attenuation ofpeeling force after PCT.
Unique crystallization point control process High grafting rate, low addition amount. .
No blackbox effect, no need to consider the possible subsequent esterification reaction.
