Advanced Titanium Bimodal Powder Polyethylene Catalyst for High-Strength LDPE Production
- Model
- PA-004
Item specifics
- Technology
- Bostar
Review
Description
Item Unit Index
Appearance — Light Pink Powder
Aluminum Content % 1.50～6.00
Magnesium Content % 1.00～4.50
Titanium Content % 1.00～4.50
Average Particle Size μm 15.00～35.00
Bulk Density g/cm³ 0.350～0.450
Volatile Content % ≤15.00
Characteristics:
1.Catalyst PSD is narrow and has a good morphology
2.Good hydrogen sensitivity and copolymerization
3.It can produce a full range of products with MI of 0.02~100g/10min and density of 0.918~0.970g/cm³
4.Compared with the LDPE film material, the film products have a higher tear strength, which can reduce the film thickness
5.Blow molding products are light and have excellent ESCR performance, processing performance and low expansion
6.Pipe products can not only ensure the strength, but also greatly reduce the pipe wall thickness and reduce the cost
7.Extruded coating material has both good processing performance and mechanical properties
